— Watermark Options
In the Watermark Options (A) and Watermark Options (B) menu, you can enable water-
mark printing.
1
2
3
4
5
6
7
8
1) Watermarking
2) Watermark Text
3) Watermark Text Size
4) Watermark Text Angle
5) Watermark Gray Level
6) Watermark Font
7) Watermark Position
Printing Guide — Printing from Macintosh
This sets the printing of a watermark.
Select the watermark text to be printed. If there is not a preferred watermark in the
list, enter the watermark text in the field displayed.
Select the font size of watermark text. If there is not a preferred font size in the list,
enter the font size by points. You can enter from 4 points to 400 points in units of 1
point.
Select the degree of angle for rotating the watermark text. If there is not a preferred
angle in the list, enter the degrees from -90 to 90 degrees in units of 1 degree.
Select the gray level of the watermark text color. If there is not preferred gray level
in the list, enter the percentage from 1% to 100% in units of 1%.
Select the font family for the watermark text.
Select the position of the watermark text. If there is not preferred position in the list,
enter the X position and Y position manually.
3. Printing
275