Toshiba e-STUDIO 281C Printing Manual page 297

2) Department Code (DC) - Digit 2
3) Department Code (DC) - Digit 3
4) Department Code (DC) - Digit 4
5) Department Code (DC) - Digit 1
Booklet
In the Booklet menu, you can set booklet printing.
1
2
3
4
1) Booklet Page Size
2) Left to Right Page Layout
3) Booklet Center Margin
4) Booklet Outer Margin
Printing Guide — Printing from Macintosh
Select the second digit of the department code.
Select the third digit of the department code.
Select the forth digit of the department code.
Select the fifth digit of the department code.
Select a paper size for the booklet. Each two pages are printed on both side of a
sheet which is then folded. The booklet size will be the half size of the paper size
that you specify.
Check this to create a booklet can be read from left to right.
Select the width of space added to the center.
Select the width of space added short edge side of a sheet.
3. Printing
297