About Installation Procedure; Parallel Port Connection; Usb Connection - Toshiba e-STUDIO 281C Printing Manual

2. Installing Client Software

About Installation Procedure

Please find the installation procedure suited to your environment from the following:

— Parallel Port Connection

Available for:
When this equipment is connected to your computer with a printer cable, you can install
the printer drivers from the Client Utilities CD-ROM and set up the printer connection
with LPT1 port.
NOTES: •
•

— USB Connection

Available for:
This equipment supports the USB 2.0 Full Speed connection. When this equipment is
connected to your computer with the USB cable, you must install the printer drivers
using the Windows Plug and Play functions.
NOTE: This equipment cannot connect to the same computer with both Parallel and USB at a
same time.
22
P.22 "Parallel Port Connection"
P.22 "USB Connection"
P.23 "Local Area Network over TCP/IP"
P.24 "Internet Connection"
P.25 "Novell Printing"
Windows 98, Windows Me, Windows NT 4.0, Windows 2000,
Windows XP, Windows Server 2003
Connecting with Parallel cable
Setting up the LPT1 Printer
Connection
P.27 "Installing Client Software for Parallel Printing"
Parallel printing is available only when the Parallel Interface is installed.
This equipment cannot connect to the same computer with both Parallel and USB at
a same time.
Windows 98, Windows Me, Windows 2000, Windows XP,
Windows Server 2003
Connecting with USB
Setting up the USB Printer
Connection
P.53 "Installing Client Software for USB Printing"
Printing Guide — Installing Client Software for Windows
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows 98
Windows Me
Windows 2000
Windows XP
Windows Server 2003