Setup Flow For Printing Via Windows Print Server - Toshiba e-STUDIO352 Quick Start Manual

5 SETUP FLOW

Setup Flow for Printing via Windows Print Server

When you want to manage all print jobs in the print server instead of directly printing to this
equipment, the Microsoft's Client Server network solution is helpful. In this case, an administra-
tor sets up the sharing printer using Raw TCP or LPR printing in Windows NT 4.0, Windows
2000, Windows XP, Windows Vista or Windows Server 2003. Then clients can install the printer
driver from the Windows print server using SMB printing.
Setup Flow
Connect this equipment
Set up the TCP/IP (IPv4)
52 SETUP FLOW FOR PRINTING FEATURES
Connecting to Client Server type of Microsoft network
Setting up the Raw TCP
or LPR connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"2. CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol (IPv4)"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Windows NT 4.0 Windows NT 4.0
Windows 2000 Windows 2000
Windows XP Windows XP
Windows Vista Windows Server 2003
Windows Server 2003
Setting up the SMB
printer connection
Description/Reference