Installing The Client Software For Smb Printing - Toshiba e-STUDIO 281C Printing Manual

2. Installing Client Software
NOTE: It assumes using SMB printing in a small network. If you can use the Windows NT 4.0,
Windows 2000, Windows XP, or Windows Server 2003 as a print server, it is recom-
mended to set up for printing via Windows print server. For further information about
setting up printing via a Windows print server, see the Network Administration Guide.

Installing the client software for SMB printing

The following describes an installation on Windows 2000. The procedure is the same
when other versions of Windows are used.
NOTE: You must log into Windows as a user who has the "Administrators" or "Power Users"
privilege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows
Server 2003.
1.
2.
3.
86
Insert the Client Utilities CD-ROM into the CD-ROM drive.
• The installer automatically starts and the Choose Setup Language dialog
box appears.
• If the installer does not automatically start, double-click "Setup.exe" in the
Client Utilities CD-ROM.
Select your language and click [OK].
• The InstallSheild Wizard dialog box appears.
Click [Next].
• The License Agreement screen is displayed.
Printing Guide — Installing Client Software for Windows