Setup Flow For Printing Via Windows Print Server - Toshiba e-STUDIO 2500c Quick Start Manual

5 SETUP FLOW

Setup Flow for Printing via Windows Print Server

When you want to manage all print jobs in the print server instead of directly printing to this
equipment, the Microsoft's Client Server network solution is helpful. In this case, an administra-
tor sets up the sharing printer using Raw TCP or LPR printing in Windows NT 4.0, Windows
2000, Windows XP or Windows Server 2003. Then clients can install the printer driver from the
Windows print server using SMB printing.
Setup Flow
Connect this equipment
Set up the TCP/IP
Set up the Printing Ser-
vice
48 SETUP FLOW FOR PRINTING FEATURES
Connecting to Client Server type of Microsoft network
Setting up the Raw TCP
or LPR connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Enable the Raw TCP or LPD Printing Service using TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Print Service Settings"
"Setting up the Raw TCP Print"
"Setting up the LPD Print"
Windows NT 4.0 Windows NT 4.0
Windows 2000 Windows 2000
Windows XP Windows XP
Windows Server 2003 Windows Server 2003
Setting up the SMB
printer connection
Description/Reference