Configuring The Print Queue - Toshiba e-STUDIO 281C Printing Manual

NOTE: If the output is not as above, ask your administrator.
4.
5.
6.

— Configuring the Print Queue

After you copy UNIX Filters, you can configure the print queue.
There are two ways to configure the print queue: one is creating a print queue using
est451cadd, and the other is creating a print queue manually without using est451cadd.
Creating a Print Queue Using est451cadd
You can create a print queue using est451cadd.
Creating a print queue
1.
Printing Guide — Installing Client Software for UNIX
For IBM AIX:
uname -a
Output on screen should be:
AIX
For Linux:
uname -a
Output on screen should be:
Linux
For OpenUNIX:
uname -a
Output on screen should be:
OpenUNIX
Change to the root directory.
Enter the following command:
For Solaris:
tar xvf solaris.tar
For HP-UX:
tar xvf hpux.tar
For IBM AIX:
tar xvf aix.tar
For Linux:
tar xvf linux.tar
For OpenUNIX:
tar xvf openunix.tar
The command extracts all the required files and installs them
in the correct locations. Continue the procedure for config-
uring the print queue.
P.169 "Configuring the Print Queue"
P.169 "Creating a Print Queue Using est451cadd"
P.170 "Creating a Print Queue Manually"
Log on to the root account.
2. Installing Client Software
169