Toshiba e-STUDIO 281C Printing Manual page 172

2. Installing Client Software
4.
5.
6.
7.
8.
9.
10.
Creating a print queue manually on Linux
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
172
Open your Linux/UNIX editor.
Create the following file.
/etc/lp/interfaces/<queue name>.conf
Add a line as below in the <queue name>.conf.
dest=<IP address>
Save the file.
Enter the following command:
mkque -q <queue name> \
-a s_statfilter = /usr/lib/lpd/bsdshort \
-a up = TRUE -a host = <IP address> -a rq = dssc
Enter the following command:
mkquedev -q <queue name> -d dev_<queue name> \
-a backend = /opt/toshiba/tap/bin/est451cBackend
Enter the following command:
cp /usr/lib/lpd/pio/predef/net_est451c \
/opt/toshiba/tap/filter/<queue name>
Enter the following command:
ls /opt/toshiba/tap/interface
If the above directory does not exist, enter the following
command:
mkdir /opt/toshiba/tap/interface
As root open your Linux/UNIX editor.
Open your Linux/UNIX editor.
Create the following file.
/opt/toshiba/tap/interface/<queue name>.conf
Add a line as below in the <queue name>.conf.
dest=<IP address>
Save the file.
Enter the following command:
cp /opt/toshiba/tap/model/net_est451c \
/opt/toshiba/tap/interface/<queue name>
Enter the following command:
/opt/toshiba/tap/bin/modPrintcap \
-a <queue name> <IP address>
Enter the following command:
ls /opt/toshiba/tap/bin/flag_<queue name>
Printing Guide — Installing Client Software for UNIX