Configuring The Print Options - Toshiba E-Studio 2802A Software Installation Manual

4.INSTALLATION IN UNIX/Linux
 Configuring the print options
You can set the print options that are applied to the print jobs using CUPS.
1
Click the [Manage Printers] link on the [Administration] tab.
2
Select this equipment and then click [Set Default Options].
3
Configure the print options on the displayed page.
The underscored items are set by default.
Installed Options
Option Value
Drawers
ADU
[Set Default
Options] button
General
Option Value
Media Size A3, A4, A5, J Post Card, B4, B5,
Folio, Letter, Ledger, Legal,
Statement, Computer, 13" LG, 8.5"
SQ, 8K, 16K, Env DL, Env Cho-3,
Env You-4, Env-Com10, Env-
Monarch, Env-C4, Env-C5
Media Source Auto (Default)
Drawer 1
Drawer 2
Drawer 3
Drawer 4
Bypass Tray
Media Type Printer's Default
Plain Paper
Thick
Thick 1
Thick 2
Transparency
Thin
Envelope
Duplex Off
Long Edge (Standard)
Short Edge (Flip)
[Set Default Determines the selected items.
Options] button
Alternative Value
Not Installed
Drawer 2
Drawer 2 and 3
Drawer 2,3 and 4
Installed
Not Installed
Determines the selected items.
Alternative Value
Description
Select an optional drawer.
Select the Automatic Duplexing Unit option.
Description
Select the paper size.
Select the paper source.
Select the paper source.
1-sided printing
2-sided printing (Long-edge binding)
2-sided printing (Short-edge binding)
Configuring the Printer Using CUPS
4 INSTALLATION IN UNIX/Linux
39