Quick Set-Up - Palamides delta 151 Manual Instruction

9
9

Quick set-up

Short introduction for quickly setting-up the machine:
More detailed information can be found on the pages indicated.
9.1 Mechanical set-up
1. Set up machine to the previous machine and lock the adjusting feet
2. Adjust delivery's height
3. Call up one product from the folding machine or saddle stitcher
and adjust round belts
4. Set infeed photocell
5. Adjust pressing unit
- Folding machine
- Saddle stitcher
Controls:
1. Press calibrate key
2. Call up product
3. Press auto calibrate key
6. Call up the product and allow it to run up to the shaft by
pressing the rocker switch.
7. Adjust lateral jogging plates to the product.
8. Adjust adjusting frame to the product width
9. Adjust support finger under the product edges.
9.2 Controls
1. Enter amount
2. Set total counter to zero
3. Select single sheet or shingled stream depending on
the product and speed.
4. Align the round belt's speed on the folding machine
or saddle stitcher +/-. 10%.
46
1. Pre press roller 75%
2. Main press roller 50%
1. Pre press roller 125%
2. Main press roller approx. 100% or more
Quick set-up
Page 25
Page 25
Page 20
Page 19
Page 31
Page 37
Page32
Page 37
Page 37
Page 34
Page 34
Page 39
Page 41
Page 42
Page 30
Subject to change without notice