Palamides delta 151 Manual Instruction page 42

7
7.10.8 Jogging function in the packaging cycle
The jogging function during the packaging cycle can be blocked here
0 = normal
1 = continuous operation in the packaging cycle
7.11 Single sheet operation
Single sheet mode is recommended for sensitive or freshly-printed products, thick products
or a low folding speed.
Choose single sheet operation for products with a sensitive surface e.g. pages of books or
art printing. It is possible that these products could be marked during shingling or when the
stopper reaches into the shingled stream. Single sheet operation should also be chosen for
freshly-printed products. These products tend to rub against each other as the products are
pushed on top of each other during shingle formation.
The [shingled stream / single sheet] key alternates between these two operating modes.
Single sheet mode can be recognised by the transport belts running permanently.
7.12 Shingled stream operation
Shingled stream operation is suitable for non sensitive products, small formats or high
production speed, e.g. newspaper inserts, mailings, flyers.
The transport belt is timed with photocells BEX2.1 and BEX2.2 and only runs when products
are fed in. Shingle formation can be increased or decreased as required. This is carried out
in the optimisation menu.
42
Setting up the machine
Subject to change without notice