Table of Contents
Advertisement
6
Group 2 description
(1)
Set up
(2)
Optimisation
(3)
Manual mode
(4)
Service
(5)
Error
(6)
Auto set up
(7)
Home position /
remainder packing
(8)
Calibration
(9)
Inspection sheet
(10)
Language
(11)
Single sheet
Activates the single sheet
(12)
Options
22
(11)
(12)
(1)
(2)
(3)
(4)
(5)(6)
All adjustments which are necessary for operation
are carried out in this menu
All adjustments which differ from the default values
are carried out in this menu.
The selected drives are operated manually in this
menu
Service functions are accessed in this menu. Partly
password protected.
The latest errors are shown on the display when this
button is pressed. Errors are described during
operation.
First calibrate! The shingling axle will run to the
calibrated sheet length by pressing the "auto set up"
key
1. When the machine has stopped, it is brought to
the home position by pressing this key
2. When the machine has started, the function of this
key is remainder packing.
The small control light on the key flashes when this
key is pressed. The next sheet that comes along will
be measured and taken as a reference. The light
goes out.
1. The waste sheet deflector ejects the next sheet.
2. The key flashes if it is pressed approx. 3 sec. All
further sheets will be ejected until the key is pressed
again.
Choice of language
Alternates between "shingled stream" mode and
"single sheet" mode.
In single sheet mode the transport belt runs
continuously. In shingled stream mode the transport
belt only runs when products are fed in.
All options offered by this machine are displayed
when this key is pressed. Optimisation of the options
can be carried out here.
Handling and Operation
(10)
(9)
(8)
(7)
Abb.491
ubject to change without notice
Hide quick links:
Advertisement
Table of Contents
