Setting up the machine
7
Setting up the machine
Setting the machine up for new jobs is described here. Each step is described in the order
that has proved itself in practise.
7.1
Infeed through the round belts
The round belts take the products from the folding machine or saddle stitcher.
For multiple up work, the products must be spread out. The angled infeed aligns the product
to the pile containers.
Note the sequence for adjustments:
1. upper round belt shaft 1
2. lower round belt shaft 2
3. upper round belt shaft 3
4. lower round belt shaft 4
Plan of the side view of the delivery
TOOLS REQUI4RED:
Allen key or screwdriver
!
WARNING
Subject to change without notice
3
4
Danger of being caught in running belts.
Tools or fingers can be pulled in.
Let the belts run very slowly. Set the press drive at minimum speed for
this..
1
2
7
27