Palamides delta 151 Manual Instruction page 12

3
8. Never remove the protective, or rather safety devices on the machine and never alter the
machine so that safety can no longer be guaranteed.
9. Only use tools which are in perfect condition and take care that no tools are
!
10. Pay attention to all safety and danger tips on the machine and keep these tips in a
legible / visible condition.
11. Report all audible / visible safety-related machine changes to the appropriate authority in
your works.
12. Operating personnel must have long hair tied back and may not wear loose clothing or
jewellery, including rings. There is a danger of injury should they get caught up or drawn
in.
13. When the machine is running, never try to clean it (rollers, belts), or to rectify faults or set
it up.
14. Make sure that no other person switches the machine on while you are busy
!
15. Do not immediately switch the machine back on if it stops for some unknown reason.
Make sure first that the machine is in perfect condition and that no other person is busy
on the machine.
16. If you have to carry out extensive mechanical / electrical maintenance or repair work to
the machine, turn off the main switch and, if necessary, secure it with a padlock.
17. Never open the main control cabinet or lower service cabinet! Electric, or
!
18. Report any exposed cables or electrical connections to the appropriate authority in your
works.
19. According to the latest safety regulations, the machine must stop if one of
!
20. >DANGER< In order to stop the hoods from closing themselves, it is
!
12
left lying on the machine after adjustment or maintenance work. Tools which
may fall into the machine can lead to serious consequences for both man
and machine.
on it - e.g. whilst setting up or during other work! >Danger< Therefore,
always press the EMERGENCY-OFF Button
rather, electronic work may only be carried out by relevant authorised
personnel or by the manufacturer's or supplier's personnel. >MORTAL
DANGER< with the control cabinet OPEN! With the control cabinet opened,
even with the main switch turned off, there is still electrical current on the
main terminal clamps!!!
the safety hoods is opened. The hoods, which serve both as safety and
noise dampening hoods, contain electrical switches. These switches may
never be dismantled or bridged, as this would mean >DANGER< to the life
and limb of the operator.
necessary to ensure that the hoods are completely opened as far as they will
go.
Fundamental Safety Advice
Subject to change without notice