Setting up the machine
7.3
Presssing unit
The pressing unit consists of pre and main pressing rollers. The pre-press rollers press any
trapped air out of the product. The main press rollers press the product with up to 3.5t.
Adjust pressing unit:
Adjust pressing unit
(4)
(3)
Abb.1735
1. Loosen all four star handles (1).
2. Open lever (2).
3. Put under 75% of the product (4).
4. Put under 50% of the product (3).
5. Carry out the adjustment on both sides
6. Close the lever
7. Re-tighten the star handles.
T
: Tighten only by hand
I P
N
: Check product for marking
O T E
Subject to change without notice
(1)
(2)
7
31