Palamides delta 151 Manual Instruction page 14

4
Metal angled pieces
Picture 8467
The machine can then be taken off the pallet using a forklift truck. The forks of the forklift
truck must be positioned as shown in the photograph below because of the centre of gravity.
The machine must be moved carefully in order to prevent it from tilting.
T : Screw the adjustable feet (2) in the holes. The adjustable feet are part of the
I P
accessories in the tool box delivered with the machine. They are screwed into the machine
frame.
View
Picture 1779
Picture 1782
14
(1)
(2)
(2)
Machine installation
(1)
Subject to change without notice