Troubleshooting; Limited Warranty - Eneo VMC-17LCD-OPC3 Installation And User Manual

* When the following troubles are occurred, follow the trouble shooting. Before contacting a
service center.

Troubleshooting

The screen doesn't show up
The screen is too light or to dark
The screen size is not fit for the PC
signal
The screen color shows strange in
the PC signal
All products carry a limited warranty from ship date against defects in materials and
workmanship. We are not liable for improper installation that results in damage to mounts,
adapters, display equipment or personal injury.
eneo ® is a registered trademark of Videor E. Hartig GmbH
Exclusive distribution through specialised trade channels only.
Videor E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark, Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100
www.videor.com
www.eneo-security.com
TROUBLESHOOTING
Troubleshooting Tip
1. Make sure if the power supply is connected property
2.
Turn on the power.
3. Select the input signal right for the connected port.
Control the BRIGHTNESS
Press the AUTO key among keys in the front.
(It is used only in the PC signal)
In the FUNCTION menu of OSD menu, perform the AUTO-
ADJUST.

Limited Warranty

Installation and User's Guide
Technical changes reserved.
© Copyright by Videor E. Hartig GmbH 01/2012
pg16