Eneo VMC-17LCD-OPC3 Installation And User Manual page 10

OSD (On Screen Display) SETTING
■ A. INPUT Select
Inputs can be set to VIDEO1, VIDEO2, S-VIDEO, RGB PC and HDMI mode.
Press the ► key then you can change the input source.
■ B. MENU SELECTION
1. Press the MENU/EXIT key to access the main menu.
2. Use the  and  arrow key to highlight a selection.
3. Press the ►/SELECT key to select an item.
4. Use the  and  arrow key to highlight a selection.
5. Use the ◀ and  arrow key to adjust the setting on a selected item.
NOTE : If you don't connect RGB port, RGB SETUP menu is not select.
Installation and User's Guide
pg10