Operation And Function - BADU OmniTronic Translation Of Original Operation Manual

• Ж: Frost protection
• E: Error message (Error)
Display of the battery status:
•
•
3.3

Operation and function

The BADU OmniTronic is a fully automatic backwash unit. The
electronics (circuit board) automatically take over the control of
the programme sequence i.e. the transition to all six positions:
– Backwash (BW)
– Rinse (RIN)
– Filter (FIL)
– Drain (DR)
– Circulate (CIR)
– Closed
The filter pump only runs depending on the BADU OmniTronic i.e.
the filter pump has to be controlled by the BADU OmniTronic. The
BADU OmniTronic requires its own power supply. Thus, due to
the internal power supply, backwash and rinse procedures can be
carried out automatically and independently, regardless of
external switching procedures for the filter programme. This is
also possible outside the filter times. During this process, the
BADU OmniTronic takes over the monitoring and control of the
filter pump. This ensures that the pump is turned off during the
switching process and that only the positions "Backwash" and
"Rinse" are turned on. The output to the pump with the
asynchronous motor (Lp, Np) always switches in parallel to the
eco green line pump's speed levels n1, n2, n3.
04|2019
Battery voltage present
Battery voltage too low, replace (CR2032)
Description
EN 19