Installation; Installation Site; There Must Be Ground Drainage; Ventilation And Aeration - BADU OmniTronic Translation Of Original Operation Manual

5

Installation

5.1

Installation site

5.1.1 Installation
• The BADU OmniTronic's installation site must be clean and
dry. Installation outdoors is not permitted.
• The BADU OmniTronic should be installed horizontally. Other
installation positions are not intended and must be cleared by
the manufactorer.
5.1.2

There must be ground drainage

 Calculate the size of the ground drain according to the
following criteria:
– Size of the swimming pool.
– Circulation flow rate.
5.1.3

Ventilation and aeration

 Ensure sufficient ventilation and aeration. The ventilation and
aeration must ensure the following conditions:
– Prevention of condensation.
– Limitation of the ambient temperature to maximum 40 °C.
5.1.4

Reserve space

 Measure reserve space so that the upper part of the BADU
OmniTronic can be removed and the clock can be set without
any trouble. Observe a removal height of 200 mm.
5.1.5

Cable laying/line laying

 Voltage potentials must be separated as shown in the
following drawing.
Use line/cable laying as shown in the following drawing.

04|2019
Installation
EN 29