Maintenance; Warranty; Service Addresses - BADU OmniTronic Translation Of Original Operation Manual

Maintenance

8 Maintenance
When?
Regularly
With danger of
frost
The backwash can be triggered manually using the outer

keys. In doing so the backwash procedure can be tested.
8.1

Warranty

The warranty includes the devices delivered and all components.
However natural wear and tear (DIN 3151/DIN-EN 13306) on all
turning and dynamically loaded components, including electronic
components under tension, is not covered under the warranty.
Failure to comply with the safety instructions may void the
warranty.
8.2

Service addresses

Service addresses can be found on our website
pumps.com.
44 EN
What?
 Check the clock through the
transparent lid.
 Drain the unit completely.
www.speck-
04|2019