Memory - Topcom BPM WRIST 2501 User Manual

TOPCOM BPM WRIST 2501

12 MEMORY

AM
PM
mon. d
mem.
AM
PM
mon.
mem.
When the batteries are installed, the data in the memories
will not be lost even when the Blood Pressure Monitor is
switched off.
Remove the batteries for more than 10 seconds to erase the
memories.
12
The BPM 2501 has two Memory zones. Each can
store up to 50 measurements including the date
and time
The result will be stored automatically in the
selected Memory Zone after the measurement.
Select the desires Memory Zone before
measurement.
• Press the MEMORY ZONE button to acti-
• Press the Memory Zone button again to
• Press the POWER button to switch the
To recall measurement results:
• Press the MEMO button to activate the
d
• Press the MEMORY ZONE button to
• Press the MEMO button to confirm. The
• Press the MEMO button again to see the
• Press the MEMO successively for prior
vate the display. The actual selected
Memory Zone is displayed.
select the memory zone 1 or 2 in which
you want to store the measurement result.
unit off.
display.
select the memory zone 1 or 2 from which
you want to recall the measurement result.
calculated avarage of all measurement
together is displayed.
last measurement result.
values stored.