Memory; Setting Date And Time - Topcom BPM WRIST 2301B User Manual

9.4

Memory

The BPM 2301b has two Memory zones. Each can store up to 30
measurements including the date and time
The main unit automatically stores the previous measured values.
Remove the batteries for more than 1 minute to erase the entire
memory.
• Press the 'POWER' button to activate the display.
• Press 'PAGE' to select memory zone
• Press 'MEMO'. The latest stored measurement result is
displayed.
• Press the 'MEMO' button successively to read previous
measurement results.

10 Setting date and time

The Date and time is displayed on top of the LCD panel.
To adjust the date and time:
• Press the 'POWER' button to activate the unit.
• Press 'TIME' at least 5 seconds, the 'year' blinks on the display.
• Press 'MEMO' to increase or 'PAGE' to decrease the "Year".
• Press 'TIME' to confirm, the 'month' digits start blinking.
• Follow the same instructions as used for the year to change
Month, Day, Hours and Minutes.
• After confirming the Minutes, you will leave the time setting menu.
• Press the 'POWER' button to deactivate the unit.
Topcom BPM 2301b
or .
61