Procedure - Topcom BPM WRIST 2501 User Manual

TOPCOM BPM WRIST 2501
11.2

PROCEDURE

AM
PM
mon.
mem.
AM
PM
mon.
mem.
AM
PM
mon.
mem.
AM
PM
mon.
mem.
1.
d
2.
d
3.
d
d
4.
Press the POWER button. All digits
will light up, checking the display
functions. The checking procedure
will complete after about 2 sec-
onds.
After all symbols appear, the dis-
play will show "0" with the desig-
nated Memory Zone.
After initialisation the monitor auto-
matically inflates the cuff to approx-
imately 180 mmHg. The
measurement will begin.
This monitor will re-inflate
automatically to approximately
220mmHg if the system
detects that your body needs
more pressure to measure
your blood pressure.
When the measurement is com-
pleted, systolic, diastolic and pulse
will be shown simultaneously on
the LCD screen.
When a mistake was detected
during measurement the Error
mark appears on the display
11