Table of Contents
Advertisement
Installing the server and peripheral devices
Figure 6: Dongle installed on the server.
To install the software feature dongle
1. Ensure that there is nothing plugged into the upper USB port labeled D on the rear
2. If the software feature key is not pre-installed in the dongle, insert it into the software
Figure 7: Dongle without feature key
3. To eject a software feature key, insert a straightened paper clip into the side access
36
Avaya CallPilot® 1006r Server Hardware Installation
panel.
feature slot on the dongle. Insert the software feature key with the data contact
facing down and away from the embossed i. See
key
on page 37.
hole.
Push the paper clip in the direction of the software feature key.
Figure 8: Installing the feature
December 2010
Advertisement
Table of Contents
