Table of Contents
Advertisement
About the Adaptec RAID Configuration Utility
The Adaptec RAID Configuration (ARC) utility is a BIOS-based utility that you can use to
create and manage controllers, disk drives and other devices, and arrays. The ARC utility
comprises these tools:
Array Configuration Utility (ACU)—For creating and managing arrays, and initializing
and rescanning disk drives. (ACU for DOS is also available. See
A -Select utility—SerialSelect, SATASelect®, or SCSISelect®, for modifying your controller
and disk drive settings.
Disk Utilities—For formatting or verifying disk drives.
TheARC utility is included in your controller's BIOS. For more information, see
Adaptec RAID Configuration Utility on page
Note:
ARC
The
About the Adaptec Flash Utility
The Adaptec Flash Utility (AFU) is a text-based DOS utility that you can use to update, save, or
verify your RAID controller's firmware BIOS and Non-Volatile Random Access Memory
(NVRAM).
Caution:
!
your RAID controller's flash contents, it is still important to use the AFU carefully and
correctly to avoid rendering your RAID controller inoperable.
Adaptec recommends that only advanced users familiar with working in DOS use the AFU.
Which Utility Should I Use?
To create a bootable array, Adaptec recommends that you use the BIOS-based ACU (See
Adaptec RAID Configuration Utility on page
For all subsequent storage management tasks, Adaptec recommends that you install and use
Adaptec Storage Manager (see
user interface, it is the easiest to use and offers the widest range of management functions.
Note:
Currently, Adaptec Storage Manager is not supported on FreeBSD. To create and
manage arrays, use the
78
for more information.
utility is primarily intended for preoperating system installation configuration.
Although the AFU contains safeguards to prevent you from accidentally damaging
page
56). As a full-featured software application with a graphical
ARC
Using the Adaptec RAID Configuration Utility
utility. See
Chapter 9: Managing Your Storage Space
page
78.
78).
57
86.)
Using the
Using the
on page
Advertisement
Table of Contents
