Installing on UnixWare
To install the driver on UnixWare:
Start your computer, then insert the driver disk.
1
Begin the driver package installer:
2
pkgadd -d diskette1
At the installer prompt, type
3
Select 1 for the aacraid package.
4
When the installation is complete, select q to quit the installer.
5
Reboot your computer and remove the driver disk.
6
Continue with
7
Installing on VMWare
Note:
The embedded driver provided by VMWare should be suitable for most applications. If an
updated driver is needed, use the following procedure.
To install the driver on VMWare:
Start your computer, then insert the driver disk.
1
At the console screen of the VMware server, mount the Adaptec CD:
2
mount –r /dev/cdrom /mnt/cdrom.
Install the module RPM:
3
rpm –ivh /mnt/cdrom/xxx/yyy.rpm
where
xxx
Reboot your computer and remove the driver disk.
4
Note:
Currently, Adaptec Storage Manager is not supported on VMWare. To create and manage
arrays, use the
Installing on FreeBSD
To install the driver on FreeBSD:
Start your computer.
1
Insert and mount the driver disk:
2
mount -t msdos /dev/fd0 /mnt
Copy the driver package to the /tmp directory:
3
cp /mnt/aac-02.00.00-x.tgz /tmp
Install the driver package:
4
pkg_add /tmp/aac-02.00.00-x.tgz
Chapter 8: Installing the Driver on an Existing Operating System
.
go
Managing Your Storage Space on page
is the driver path, and
yyy.rpm
ARC
utility. See
page 57
for more information.
55.
is the rpm file.
53