Operating Modes - Fronius ActiveCharger 1000 Operating Instructions Manual

Operating modes

Charging
Starts automatically when the battery charger is connected to the power source and the
mains
-
-
-
-
-
Quick charging
Activation:
1
-
-
-
-
Deactivation:
1
Conservation charging
Starts automatically once the battery charger has fully charged the power source
-
-
-
-
Hybrid mode
= the battery charger is charging the power source while the power source is in operation
Acivation:
1
1
-
-
-
The CHARGING indicator is lit
Mains indicator lit
The power source is charged at optimum charging power
The charging characteristic of this mode maximises the service life of the power
source
When the COMPLETED indicator lights up, the power source is fully charged
and the battery charger switches to conservation charging mode
Press the QUICK CHARGING button
The QUICK CHARGING indicator is lit
Mains indicator lit
The power source is charged at the maximum possible charging power
When the COMPLETED indicator lights up, the power source is fully charged
and the battery charger switches to conservation charging mode
Press the QUICK CHARGING button again
Charging mode resumes
-
Mains indicator lit
The COMPLETED indicator is lit
The power source is charged at conservation charging power
In this mode, the power source can remain connected to the charger without being
damaged.
Start welding during charging
or connect the power source to the charger while it is in operation
The QUICK CHARGING indicator is lit (charging at the maximum possible
charging power in hybrid mode)
Mains indicator lit
The power source is discharged according to its operating load and simultaneously re-
charged by the charger
65