Control Panel - Fronius ActiveCharger 1000 Operating Instructions Manual

Control panel

(1)
(2)
(3)
(4)
(5)
(6)
(11)
(10)
(9)
(8)
(7)
Setting value indicator
shows which setting value is selected:
- Arc-force dynamic
- Welding current
- SoftStart / HotStart function
- TIG pulsing (only enabled on TIG version)
Unit indicator
shows the unit of the value that is currently being changed using the adjusting dial
(8):
- Percent
- Voltage (volts)
- Frequency (Hertz)
- Time (seconds)
Battery capacity indicator
shows the state of charge of the battery:
- Battery fully charged
- Battery capacity 75%
- Battery capacity 50%
- Battery capacity 25%
- Battery discharged
shows the operating mode:
- lights up in the following situations:
- Pure welding mode
- Conservation charging mode
- a bar also flashes in the following operating modes:
- Charging
- Quick charging
- Hybrid mode
Display
Welding process indicator
shows which welding process is selected:
- MMA welding
- MMA welding with Cel electrode
- TIG welding
- Reserved for special programs
Welding process button
for selecting the welding process
Charge the battery now!
(1)
(2)
(3)
(4)
(5)
(6)
35