Loading Paper - Epson ColorWorks C6500Au Technical Reference Manual

Loading Paper

This section describes how to load and replace paper. As shown below, the procedure of replacing paper differs
depending on the size and whether paper has been/is going to be supplied from inside or outside.
Videos that show the procedure are also available.
Click the URL below to view the videos.
<https://support.epson.net/p_doc/790/>
Supply from Inside (Internal)
Paper is supplied from inside the printer. Set roll paper
attached to the spindle into the printer.
When replacing paper with a different shape, form, or type of paper, change the paper settings either
c
from the operation panel or on the printer driver before loading the paper.
Settings" on page
IMPORTANT
Paper" on page
Models
Auto cutter model
Peeler model
145, "Paper Source and Paper Detection Settings" on page
70)
Supply from Inside (Internal)
• Paper loading:
Page 46
• Paper removal:
Page 59
• Paper ejection at paper end:
• Paper loading:
Page 54
• Paper removal:
Page 60
• Paper ejection at paper end:
Supply from Outside (Rear Feed)
Paper is supplied from outside the printer. Place roll paper
or fanfold paper behind the printer.
Supply from Outside (Rear Feed)
• Paper loading:
• Paper removal:
• Paper ejection at paper end:
Page 62
Page 63
Chapter2 Setup
("Operation Panel
68, "User-Defined
Page 50
Page 59
Page 62
45