Epson ColorWorks C6500Au Technical Reference Manual page 186

Message
Information
The fanfold paper is not
loaded.
Information
Paper jam.
Information
The paper is not loaded cor-
rectly. Reload the paper.
Information
Calibration failed.
Press the OK button. Then
reload or replace the paper.
Information
The paper has already been
cut and cannot be cut.
Maintenance Error
The ink cartridge is not
installed correctly.
(On the home screen, an
exclamation mark on the ink
levels)
Information
You need to replace Ink Car-
tridge(s).
Maintenance Error
Cannot recognize the ink car-
tridge.
Select "Next" to clear the error.
Meaning
The fanfold paper is not
loaded.
A paper jam has occurred.
The paper has not been
loaded correctly.
Calibration is failed.
The printer failed to cut the
paper.
An ink cartridge is not
installed.
The ink level is low.
The printer cannot print
because the ink cartridge is
expended.
The ink cartridge information
cannot be read.
Solution
Load fanfold paper.
("Loading Paper" on page 45)
Remove the jammed paper and then load paper.
("Paper is jammed" on page 197)
Remove the paper, and then load the paper again.
See "How to Remove Paper (For the Auto Cutter
Model)" on page 59 or "How to Remove Paper (For the
Peeler Model)" on page 60, and
"Loading Paper" on page 45
Make sure that the paper loaded in the printer
matches the paper detection method (gap or black
mark), and reset the paper. ("Loading Paper" on page
45)
If the error still occurs, the detector cannot handle the
paper. Replace the paper.
This error occurs when you press the Cut button at the
position where the paper is already cut.
Feed the paper by printing or pressing the Feed but-
ton to enable the Cut button.
Install an ink cartridge with a sufficient amount of ink
remaining.
("Replacing the Ink Cartridges" on page
Prepare a new ink cartridge to be replaced with the
low-ink-level cartridge.
If you continue to use the low-ink-level cartridge, you
may be required to replace it during printing.
If you replace the cartridge during printing, you may
see a difference in color between colors printed by the
old cartridge and colors printed by the new one due to
a difference in ink drying status.
If it is not acceptable for you, replace the ink cartridge
with a new one before starting printing.
the Ink Cartridges" on page 37)
The removed ink cartridge can be installed again and
used until you are prompted to replace it.
Install an ink cartridge with a sufficient amount of ink
remaining.
("Replacing the Ink Cartridges" on page
Reinstall the ink cartridge.
If the error reoccurs, replace the ink cartridge with a
new one.
("Replacing the Ink Cartridges" on page
Chapter3 Handling
37)
("Replacing
37)
37)
186