Epson ColorWorks C6500Au Technical Reference Manual page 216

For the Auto Cutter Model
Roll Die-cut Label (Black Mark)
<Reverse Side>
Black mark width
Side edge
baseline
Center of black
mark detector
Form
Backing paper width
Label width
Label length
Gap between Labels
Waste part on the left and right
Label corner R
Paper thickness
Roll paper core inner diameter
Roll paper outer diameter
<Print Side>
Backing paper width
Waste part
Roll paper
25.4 to 215.9 mm
21.4 to 211.9 mm
When auto cut is not used: 8 to 609.6 mm (up to 24 inches)
When auto cut is used: 15 to 609.6 mm (up to 24 inches)
When auto cut is not used: 2 to 6 mm*1
When auto cut is used: 2.5 to 6 mm
2 ± 0.5 mm
1.5 mm or more
Matte Paper: 0.178 mm
Synthetic: 0.229 mm
Glossy Paper: 0.174 mm
Glossy Film: 0.164mm
High Glossy Paper: 0.188mm
76.2 mm ±0.5 mm
152.4 mm or less
Paper feed direction
Side edge baseline
Center of black
mark detector
Waste part
Label width
Appendix
Cut position
Backing paper
Label area
216