Epson ColorWorks C6500Au Technical Reference Manual page 224

Hide thumbs Also See for ColorWorks C6500Au:
Table of Contents

Advertisement

Roll paper Die-cut Label with perforation (Black Mark)
<Reverse Side>
Black mark width
Side edge
baseline
Center of black
mark detector
Form
Backing paper width
Label width
Label length
Gap between Labels
Waste part on the left and right
Label corner R
Paper thickness
Roll paper core inner diameter
Roll paper outer diameter
Winding direction
Black mark position
<Print Side>
Backing paper width
Waste part
Roll paper
25.4 to 215.9 mm
21.4 to 211.9 mm
When auto cut is not used: 8 to 301.8 mm (up to 24 inches)
When auto cut is used: 15 to 301.8 mm (up to 24 inches)
When auto cut is not used: 2 to 6 mm*1
When auto cut is used: 3 to 6 mm
2 ± 0.5 mm
1.5 mm or more
Matte Paper: 0.178 mm
Synthetic: 0.229 mm
Glossy Paper: 0.174 mm
Glossy Film: 0.164mm
High Glossy Paper: 0.188mm
76.2 mm ± 0.5 mm
152.4 mm or less
Print side must be facing outside (facing inside is unusable)
18.4 mm or more away from the side edge baseline
Paper feed direction
Perforated line
Side edge
baseline
Center of black
mark detector
Label width
Waste part
Appendix
Cut position
Backing paper
Label area
224

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents