Roll paper Continuous label (without black marks)
Waste part
Form
Backing paper width
Label width
Label length
Gap between Labels
Waste part on the left and right
Label corner R
Paper thickness
Roll paper core inner diameter
Roll paper outer diameter
Winding direction
• Paper with holes or cutouts cannot be used.
Backing paper width
Label width
Roll paper
25.4 to 215.9 mm
With waste part: 25.4 to 215.9 mm
Without waste part: 21.4 to 211.9 mm
-
-
With waste part: -
Without waste part: 2 ± 0.5 mm
-
Matte Paper: 0.178 mm
Synthetic: 0.229 mm
Glossy Paper: 0.174 mm
Glossy Film: 0.164mm
High Glossy Paper: 0.188mm
76.2 mm ± 0.5 mm
152.4 mm or less
Print side must be facing outside (facing inside is unusable)
Paper feed direction
Side edge baseline
Waste part
Backing paper
Label area
Appendix
223