Installing The Printer - Epson ColorWorks C6500Au Technical Reference Manual

Installing the Printer

Allow sufficient space for the printer. Make sure that the installation location meets the following requirements.
• On a level and stable surface with sufficient strength to support the weight of the printer
Auto cutter model: approx. 25.5 kg
Peeler model: approx. 26.3 kg.
• On an area larger than the bottom surface of the printer.
• A location that is not subject to vibrations and impacts.
• A location where a dedicated power outlet is available.
• A location where you can load and remove paper without difficulty.
• A location with sufficient space around the printer to allow for installation of accessories, replacement of
consumable products, and daily cleaning.
• A location that meets the following environmental requirements.
Printing
Storage
• Make sure to carry the printer by two or more persons.
• To lift the printer, put your hands on the indented portions on the side of the printer as shown
CAUTION
• Do not install the peeler model at a location exposed to strong light such as direct sun rays. Doing
Temperature
5 to 35°C 20 to 80% RH, No condensation
-20 to 60°C 5 to 85% RH, No condensation (without being unpacked)
below. If you put your hands on the other portions of the printer to lift it, the printer may get dam-
aged.
so may cause printing malfunction.
Chapter2 Setup
Humidity
33