Example Of Drives 3 And 4 - Buffalo TeraStation WSS WS5020N6 User Manual

Repeat steps (1) and (2) for each volume that requires resynchronization.
(3) Right-click the volume labeled "Missing" and select Remove Disk.
To repair a mirrored volume:
(1) Right-click the volume labeled "Failed Redundancy" and click Remove Mirror.
(2) When "Remove Mirror" is displayed, select "Missing" and click Remove Mirror.
(3) When "Are you sure you want to remove the mirror?" is displayed, click Yes.
Repeat steps (1) to (3) for each volume that requires resynchronization.
(4) Select the volume to be repaired and select Add Mirror.
(5) When "Add Mirror" is displayed, select the drive to be added to the mirrored volume and click Add Mirror.
If a Mirrored System Area Failed to Be Repaired
If a mirrored volume on the system area doesn't restore the first time, try initializing the drive and converting it to
a dynamic disk, then restart the TeraStation. After the TeraStation restarts, try the steps above a second time. If the
mirrored volume still cannot be restored, contact Buffalo technical support for assistance.

Example of Drives 3 and 4

1
Double-click the
2
Right-click your TeraStation's icon and select Open Remote Desktop. For macOS, select the TeraStation's icon
while holding down the control key, then select Open Remote Desktop.
3
Enter the username and password, then press the Enter key. Windows Storage Server will open in the remote
desktop.
Note: The default username and password are "Administrator" and "password".
icon to start NAS Navigator2.
93