Buffalo TeraStation WSS WS5020N6 User Manual page 105

Name
Open Remote Desktop
Configure
Label Color
View Options
Auto Power Mode
To display these options,
hold down the control
key and click your
device's icon.
The following tasks may be performed from the Buffalo NAS device's properties page.
Name
Remote Desktop
IP Address
Open Folder
Open Remote Desktop
Configure
I'm here
Label Color
Description
Click Open Remote Desktop to open Windows Storage Server.
Select the "Use DHCP" checkbox to assign an IP address from the DHCP server
automatically. If there is no DHCP server on the network, you cannot use this
function. Select the "Renew IP address" checkbox to obtain an IP address from
the DHCP server. You can manually enter an IP address, subnet mask, and default
gateway.
Description
Opens Windows Storage Server in remote desktop.
Opens the properties page that lets you configure
the Buffalo NAS device's IP address or open Windows
Storage Server in remote desktop.
Selects the color of the name displayed below the icon.
Lets you choose icon size, position, and view mode.
Auto power mode can turn supported Buffalo NAS
devices on the network on and off automatically.
Opens the Buffalo NAS device's shared folders.
Opens Windows Storage Server in remote desktop.
Opens the properties page that lets you configure
the Buffalo NAS device's IP address or open Windows
Storage Server in remote desktop.
Causes your Buffalo NAS device to beep.
Selects the color of the name displayed below the icon.
102