Additional Information - Buffalo TeraStation WSS WS5020N6 User Manual

2
Insert the SD card into the card reader (not included).
3
Connect the card reader to the USB port on the TeraStation.
4
Turn on the TeraStation while holding down the function button. This executes the recovery process.
5
The TeraStation shuts down automatically when the recovery process is complete.
6
Remove the card reader and press the power button. When the initial setup is complete, the TeraStation will
reboot into Windows Storage Server.
After the recovery process is completed, the TeraStation is set to the state below when running under default
settings.
• Drive 1
100 MB (EFI System partition)
100 GB (Basic Disk/Simple)
The remaining space is an unallocated area.
• Drives 2–4
The data on the drives cannot be viewed. They appear as "Foreign" in Disk Management. To view the area on the
drives, right-click the area displayed as "Foreign" and then select Import Foreign Disks.

Additional Information

Ethernet Port Number Is Not Correct on the Windows Storage Server
Ethernet port numbers on the Windows Storage Server are assigned as the ports are recognized. They might be
different from printed port numbers.
Buffalo Dashboard and Windows Disk Management Display Different Information
Because different drive error algorithm rules are used between Buffalo Dashboard and Windows Disk Management,
drive error may appear in different timing.
Preinstalled Software Does Not Work
If a storage pool is enabled, preinstalled software does not work. Disable the storage pool.
108