Nas Navigator2 For Mac - Buffalo TeraStation WSS WS5020N6 User Manual

3
Clear the "Use DHCP" checkbox and enter the desired settings, then click OK. If the username and password
prompt appears, enter the admin username and password.

NAS Navigator2 for Mac

NAS Navigator2 is a utility program that makes it easy to display Windows Storage Server, change the TeraStation's
IP address, or check its drive in remote desktop. To install NAS Navigator2, download the installer from
http://d.buffalo.jp/WS5020N6/.
Click the icon in the Dock to start NAS Navigator2.
Click on a TeraStation's icon to display:
• Total capacity
• Used capacity
• Workgroup
• IP address
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Double-click the icon to open a share on the TeraStation.
Name
Open
Refresh
I'm here
Description
Opens the Buffalo NAS device's shared folders.
Searches for the Buffalo NAS devices on the network
again.
Causes your Buffalo NAS device to beep.
101