Changing Front Panel Settings; Acquiring Windows Event Logs - Buffalo TeraStation WSS WS5020N6 User Manual

6
Select "System" from the "Log Type" list.
7
Enter "Microsoft-Windows-WindowsUpdateClient" into the "Source" box.
8
An event ID can be blank. All events triggered by Windows Update will be notified. If you prefer only being
notified of specific events, enter those event IDs.
9
Click OK, then click OK again.
10
Enter the password of the user you're logged in as and click OK.

Changing Front Panel Settings

You may configure options for the LCD panel and adjust the brightness of the LCD panel and LEDs on the
TeraStation.
1
Click the Start button and click Display Settings.
2
Configure the desired settings and click OK.
Items
Show
Scroll Display
LCD Brightness

Acquiring Windows Event Logs

To acquire event logs of the TeraStation, follow the procedure below.
Select the items to be displayed on the LCD panel.
If enabled, the LCD scrolls through display items at a regular interval.
Change the brightness of the LCD panel and LEDs from level 1
(darkest) to 5 (brightest).
If you select the "Night Mode" checkbox, the LCD brightness will be
set at level 2 (dark) from 6 p.m. to 8:59 a.m. the next day.
Note: If the brightness is already set to level 1 (darkest) or level 2
(dark), night mode will be grayed out and cannot be selected.
79
Descriptions