Table of Contents
Advertisement
WS5420RN6
13
22
14
15
1
Power Button (
To power on, connect the power cable and wait for 10 seconds, then press the power button. To power off,
press the power button.
2
Power LED
When the TeraStation is on, the LED glows green.
3
Info LED
If there is a status message, the amber info LED will light up. Check the LCD panel to see the status message.
4
Error LED
If there is an error, the red error LED will light up. Check the LCD panel to see the error message.
5
LAN1 LED
When LAN port 1 is connected, this LED glows green. It blinks when the connection is active.
6
LAN2 LED
When LAN port 2 is connected, this LED glows green. It blinks when the connection is active.
7
LAN3 LED
When LAN port 3 is connected, this LED glows blue. It blinks when the connection is active.
8
LCD Panel
This display shows the status of many TeraStation settings. It also displays errors and messages if any appear.
9
Display Button
Switches between the different display modes. Also, if the TeraStation beeps, pressing this button will stop the
beeping.
10
Function Button
Use this button for performing recovery or stopping the TeraStation's beeping.
11
Drive Lock (
Open the front panel with the key to replace drives or access the reset button.
13
23 3 4 5 6
24
23
16
17 18
)
)
7
13
1
8 9
25
26
27
19
6
10
13
12
16
21
20
14
Advertisement
Table of Contents
