Table of Contents
Advertisement
14
When the "Initialize Disk" window appears, click OK.
15
Right-click the initialized drive and select Convert to Dynamic Disk. A volume cannot be created unless the
drive is converted to a dynamic disk.
16
Select the step depending on your reason for a created volume.
To create a new volume (except for a RAID 5 volume or mirrored volume):
(1) Right-click the new dynamic disk and select New Volume.
(2) Follow the instructions on the screen to create a new volume.
To repair a RAID 5 volume:
(1) Right-click the volume labeled "Failed Redundancy" and click Repair Volume.
(2) When "Select one of the disks listed below. " is displayed, select the drive to repair and click Yes.
Repeat steps (1) and (2) for each volume that requires resynchronization.
(3) Right-click the volume labeled "Missing" and select Remove Disk.
To repair a mirrored volume:
(1) Right-click the volume labeled "Failed Redundancy" and click Remove Mirror.
(2) When "Remove Mirror" is displayed, select "Missing" and click Remove Mirror.
96
Advertisement
Table of Contents
