Table of Contents
Advertisement
2
Click Disk Management.
3
Check whether the volume status shows either "Failed Redundancy" or "Failed".
Status Shows "Failed Redundancy"
If the status shows "Failed Redundancy", then a volume in the RAID volume has been corrupted and the RAID
volume is operating in degraded mode. In such a case, right-click the volume labeled "Failed Redundancy" and click
Reactivate Volume in Disk Management.
When you reactivate the volume, resynchronization will run automatically. File transfers and system performance
will be slower while resynchronization is running, which will take about 23 hours for a RAID 5 volume and about 2–3
hours for a mirrored volume per a 4 TB TeraStation model.
106
Advertisement
Table of Contents
