Chapter 10 Utilities
NAS Navigator2 for Windows
NAS Navigator2 is a utility program that makes it easy to display Settings, change the LinkStation's IP address, or
check its drive. To install NAS Navigator2, download the installer from http://d.buffalo.jp/LS500/.
NAS Navigator2 will run in the system tray when the computer is on.
Double-click the NAS Navigator2 icon (
) to start NAS Navigator2.
Click a LinkStation's icon to display total capacity, used capacity, workgroup name, IP address, subnet mask, default
gateway, MAC address, and firmware version.
Double-click the icon to open a shared folder on the LinkStation.
129