MOSAICOXL
33
4.3 GOBOS REPLACEMENT
This procedure will explain how to replace gobos.
1. Lift and extract the gobo holder you want to replace from the gobo wheel.
2. Remove the spring that secures the gobo to the support.
3. Insert the new gobo respecting the direction of the painted part.
4. Insert the spring.
5. Replace the gobo support in the wheel.
6. Verify that the gobos run without hindrance and reassemble the group following the procedure in
reverse.
NOTE: gobo holder with magnet need to be fit obligatory inside slot number 3 (see paragraph "Rotating
gobos).