Advanced - ProLights jetbeam-2 User Manual

to confirm.
• Press the UP/DOWN button to select Auto Speed/High Speed, press the ENTER button to confirm your
choice.
• Press the MENU button repeatedly to exit the menu and save changes
Temperature - Select this function to set the temperature unit measurement shown on the display:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN to scroll through the menu, select the Set icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN to scroll through the menu, select UI Set, and press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select Temperature C/F and press ENTER to
confirm.
• Press the UP/DOWN button to select the unit of measure Celsius/Fahrenheit and press the ENTER but-
ton
• to confirm your choice.
• Press the MENU button repeatedly to exit the menu and save changes.
Auto and Manual test: with this menu, you can test all functions; with auto the moving head will start an auto
test, with manual you can choose each channel/function to test.

3.10 ADVANCED

Reset Functions
You can start a preset program to restore the selected function:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset be-
tween All, Pan&Tilt, Colors, Gobo, Prism.
• Press the ENTER button to confirm your choice and wait for the recovery of the selected function.
Adjust
Adjusts the lamp. This function allows you to modify all the parameters of the lamp: Pan Offset, Tilt Offset,
Color Offset, Gobos Offset, Prism Offset.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Adjust and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to select one of the parameters and press ENTER to edit the value (000-255)
through the UP/DOWN button.
• Press the ENTER button to confirm your choice and then press the MENU button repeatedly to exit the
menu and save changes.
Factory Reload
Select this function to reset the unit to factory settings:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button
JETBEAM-2
13