Sun XVR-100 Graphics Accelerator
If you install a Sun XVR-100 graphics accelerator in the workstation, be sure to read
the Sun XVR-100 Graphics Accelerator Installation Guide, 816-7560. You can find the
product notes and other documents at this web site:
http://www.sun.com/documentation/
Shielded Twisted Pair Cables
If you use ethernet and copper fiber channel connections, the ethernet cable must be
shielded twisted-pair (STP) cabling to maintain the Class B rating of the Sun Blade
2000 workstation.
Documentation Changes
Maximum Power Consumption for PCI and UPA
Busses
The maximum allowable power consumption for all PCI slots is 100 Watts.
The maximum allowable consumption for all PCI and UPA slots is 130 Watts.
This information updates the following sections of the Sun Blade 1000 Service Manual,
805-4496-10:
Section 8.2, PCI Card
Appendix C, Section C.8.1 PCI Bus
CPU Module Positions in the Workstation
This section updates the information in the Sun Blade 1000 and Sun Blade 2000 Service
Getting Started Guide, 816-3216, "CPU Module Positions in the Workstation".
When you install any CPU module, use the torque tool provided with your system.
The following publications correctly describe torque tool use and CPU installation:
16
Sun Blade 1000 and Sun Blade 2000 Product Notes • June 2004
Need help?
Do you have a question about the Sun Blade 2000 and is the answer not in the manual?