Sun Microsystems Sun Blade 2000 Manual page 14

Identifying a Workstation CPU Using prtdiag
CODE EXAMPLE 1
% /usr/platform/SUNW,Sun-Blade-1000/sbin/prtdiag
==================================== CPUs ====================================
E$
CPU Freq Size
--- -------- ----------
0 1056 MHz 8MB
1 1056 MHz 8MB
Note – The 1.050 GHz CPU appears as 1056 MHz. UltraSPARC-III+ indicates a
Cu module.
Module Labels
All Cu CPU modules have an UltraSPARC III Cu label on the front of the CPU
module. See
A part number label is also affixed to the printed circuit board of every CPU module.
Note – Avoid removing modules just to check the part number. First use the
prtdiag command or verify Cu modules with the UltraSPARC III Cu label.
CPU Module Part Number, Speed, and Type
TABLE 4
Part Number
Prefix
501-4999xxxxxx
501-5675xxxxxx
501-5770xxxxxx
501-5895xxxxxx
501-5969xxxxxx
501-5988xxxxxx
501-6169xxxxxx
501-6197xxxxxx
501-6286xxxxxx
12 Sun Blade 1000 and Sun Blade 2000 Product Notes • June 2004
CPU
Implementation
-------------------
SUNW,UltraSPARC-III+
SUNW,UltraSPARC-III+
and
TABLE 4 FIGURE 1
CPU Module Speed and Type
600 MHz UltraSPARC III
750 MHz UltraSPARC III
900 MHz UltraSPARC III
750 MHz UltraSPARC III
750 MHz UltraSPARC III
750 MHz UltraSPARC III
750 MHz UltraSPARC III
900 MHz UltraSPARC III
900 MHz UltraSPARC III
CPU Temperature
Mask Die
----- ----
2.3 76C
2.3 78C
.
CPU Label
Non-Copper
(Cu), No label
Amb. Location
---- --------
21C +-board/cpu0
21C +-board/cpu1
System
Sun Blade 1000