Sun Microsystems Sun Blade 2000 Manual page 9

todds1287 Properties in the /etc/system File (Continued)
TABLE 1
Property
todds1287:power_button_abort_interval
Solaris Operating Environment Patches
TABLE 2
and Sun Blade 2000 workstations. If you remove and reinstall any of these Solaris
operating environments from your system, you must also reinstall the appropriate
patches.
If you install one of these Solaris operating environments on a new hard drive, you
must also install the appropriate patches.
"Installing Patches from SunSolve" on page 10 describes how to determine which
patches are installed on your system. You can also use the automated Install Check
tool described in"Verifying System Configuration With the Sun Install Check Tool"
on page 3.
For smart card reader patches, see "Smart Card Reader Patches" on page 9.
Note – Always install the latest version of each patch.
Required Patches for the Sun Blade 1000 and Sun Blade 2000 Workstations
TABLE 2
Patch
Description
Kernel update
Sun XVR-500 graphics *
X11 6.4.1: Xsun patch
/usr/lib/libthread.so.1 patch
CDE 1.4: dtwm patch
patchadd and patchrm (required for 108528-19)
Linker patch
SE (Serial Driver)
shows a partial list of patches that are preinstalled on the Sun Blade 1000
Purpose
Time interval in nanoseconds allotted for the
number of presses. Default is 1,500,000,000
nanoseconds.
Minimum
Supported
Operating
Patch Environment:
Number Solaris 8 2/02
108528-29 Required
108576-33 Required
108652-65 Required
108827-40 Required
108921-16 Required
108987-12 Required
109147-21 Required
109815-15 Required
Sun Blade 1000 and Sun Blade 2000 Product Notes
Solaris 8 Solaris 9
HW 12/02 12/02
Required N/A
Required N/A
Required N/A
Required N/A
Required N/A
Required N/A
Required N/A
Required N/A
7