Table of Contents
Advertisement
S
S
UPER
ERVER 6018R-MD/MDR User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 6018R-MD/MDR lies the X10DRD-L, a dual proces-
sor serverboard based on Intel's C612 chipset. Below are the main features of the
X10DRD-L (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRD-L supports single or dual Intel
in LGA2011-3 (Socket R3) sockets. Please refer to the serverboard description
pages on our website for a complete listing of supported processors.
Memory
The X10DRD-L has eight DIMM sockets that can support up to 512 GB of load
reduced (LRDIMM) or 256 GB of registered (RDIMM) DDR4-2133/1866/1600
memory. Please refer to Chapter 5 for installing memory.
SATA
An on-chip SATA controller is integrated into the X10DRD-L to provide a six-port,
SATA 3.0 subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives
are hot-swappable units.
Note: Documentation on RAID setup guidelines can be found on our website.
PCI-Expansion
One PCI-E 3.0 x8 slot is included on the X10DRD-L. An expansion card may be
added to the system with the included riser card to support a standard size PCI-E
3.0 x8 FHHL (full-height, half-length) add-on card.
Rear I/O Ports
The rear I/O panel include one COM port, a VGA (monitor) port, four USB 2.0 ports
and two gigabit Ethernet ports. A dedicated IPMI LAN port is also included.
Onboard Graphics
The X10DRD-L provides onboard graphics with an Aspeed 2400 BMC (baseboard
management controller).
®
Xeon
®
E5-2600 v3 Series processors
1-2
Advertisement
Table of Contents
